Fill Dirt ordered online by the ton. A dump truck delivers to your Gilford address and unloads right where you point.
Fill dirt is sold by weight, and the cost you see at checkout is the delivered price for your specific address in Gilford. The number of tons you need depends on the volume you want to fill and the compaction of the dirt.
Gilford gets about 47 inches of precipitation a year, so drainage planning matters when you place fill. Water that pools on a fresh grade can turn the surface to mud before the material settles.
Fill dirt is a structural material, not a growing medium. Use it to change the ground level, not to plant in. Here is what we deliver to your site by dump truck.
| Product | Best for | Note |
|---|---|---|
| Fill Dirt | Raising grade, filling holes, backfill | Contains no organic matter, so it will not settle or rot. Delivered by the ton. |
Use this table to match your project to the right product. Depths are approximate and depend on compaction.
| Project | What to order | Depth or note |
|---|---|---|
| Filling a pool or pond | Fill Dirt | 6 to 12 inches per lift, compacted between layers |
| Raising a low yard | Fill Dirt | 4 to 8 inches above the existing grade after settling |
| Building up a pad | Fill Dirt | 6 to 12 inches, compacted to 90 percent density |
| Burying a stump hole | Fill Dirt | Fill flush and mound slightly to allow for settling |
| Backfill around a foundation | Fill Dirt | Place in 6-inch lifts and tamp well |
About 88 days a year bring at least a tenth of an inch of rain. That means you need to schedule the delivery onto firm ground, not into mud. The long freeze season in Gilford shortens the window for spreading and grading to late spring through fall.
Around 171 days a year drop below 32 degrees F. That deep frost pushes the ground up and then settles it back down, which can shift fill that is not compacted well. Snowfall here averages about 68 inches a year, so plowing can damage a loose surface before the dirt settles.
Ground freezing in Gilford is deep and long. That changes when the ground is workable and how much the fill settles after thaw. The soils in the Gilford area are in hydrologic group C, which means they take water in slowly and shed a fair amount across the surface. A deeper drainage layer under the fill earns its place in these conditions.
Measure the length and width of the area, then multiply by the depth you want in feet. Divide by 27 to get cubic yards, then multiply by about 1.4 to get tons for compacted fill. Use our fill dirt calculator to do the math quickly and adjust for your site.
Order online by the ton. Enter your address at checkout to see the delivered price for your specific ZIP code. We deliver in dump trucks from one ton up to 40-plus ton loads. Free delivery is available on qualifying orders, and new customers save $50 with code FIRSTTIMER50.
You choose a delivery window at checkout: morning, 7 am to 12 pm, or afternoon, 12 pm to 5 pm. We need a valid phone number to confirm the delivery. You get an email confirmation when you order, then a second email closer to the date with the scheduled window and a photo of the material being loaded. Delivery only goes ahead once you approve that second email.
Someone needs to be at the site during the delivery window. The site needs a road width of at least 12 feet for the truck. If access is restricted, the crew unloads as close to the requested spot as they safely can. For full details, see our About Gravel Monkey, Customer reviews, and Delivery information pages.
Fill dirt creates the base. These materials work on top of it or alongside it for the same project.
The smallest load is one ton. We deliver fill dirt in single-ton increments, so you can order exactly what your project needs without paying for extra material you cannot use.
Yes. Soils in the Gilford area are in hydrologic group C, meaning they take water in slowly and shed runoff across the surface. That slow infiltration means you may need a deeper drainage layer under your fill to keep water from pooling, which can add to the total volume of fill required.
Fill dirt is not used for planting because it contains no organic matter. For planting, you need a layer of topsoil on top of the fill. The fill itself is only for raising the grade or filling holes.
Fill dirt is a single product, not sold in different sizes. It is a consistent, excavated subsoil that is free of large rocks and organic debris. Unlike gravel, which comes in different grades, fill dirt is uniform and used solely for structural fill.
Knowing how many tons you need is the first step. Use the fill dirt calculator or call us to talk through your Gilford project. We deliver to your address on the date you choose at checkout, as long as it is at least three business days out. Start your order on our Gilford hub page.
We also deliver fill dirt to nearby towns.
See the delivered price for your address and order fill dirt by the ton online. Loads run from 1 to over 40 tons, with free delivery on qualifying orders.
Fill out the form and our sales team will get back to you within the hour.