Buy Fill Dirt in Guilford, Connecticut

Fill dirt is not topsoil. Topsoil feeds plants. Fill dirt is structural material used to raise grade, fill holes, or backfill around foundations. It contains no organic matter, so it will not settle or decompose over time. That makes it the right choice for building up a stable base.

Guilford gets about 50 inches of precipitation a year. That means any fill you place needs good drainage planning, because excess water can wash out a loose surface if the ground is not graded away from structures.

Fill Dirt Available for Delivery in Guilford

Gravel Monkey supplies one type of fill dirt for Guilford. The product is clean, unscreened fill with a mix of sand, silt, and clay. It is not suitable for planting, grading a lawn, or any application where organic topsoil is needed.

Common Projects and How Much Fill Dirt to Order

These five jobs are the most frequent uses for fill dirt in Guilford. The table gives the rough depth to plan for.

Guilford Conditions and How They Affect Your Fill Dirt Job

Guilford sits in the South Central Connecticut Planning Region, with a mix of suburban lots and rural properties. About 74 days a year bring measurable rain, so scheduling the delivery onto firm ground matters. A wet day can turn a work site into mud that makes compacting difficult.

About 123 days a year drop below freezing. That limits the work window and affects how much the ground moves. Winter closes the ground for a stretch each year, so plan the delivery for either side of it. Frost heave can shift lightly compacted fill, so deeper layers are safer if you work in cold weather.

Soils mapped in the Guilford area are commonly well drained. That means less base stone is needed under the surface layer, but the soil-water behavior (hydrologic group B) means the ground takes in water at a moderate rate. Standard base depth is usually enough, but do not skip compaction on the fill itself. About 34 inches of snow a year means plowing can disturb a loose surface if you do not cap it with a compacted layer or topsoil.

How Much Fill Dirt Do You Need?

Fill dirt is sold by the ton. To estimate the tonnage you need, measure the length and width of the area in feet, multiply by the depth in feet, and divide by 27 to get cubic yards. One cubic yard of fill dirt weighs roughly 1.3 to 1.5 tons depending on moisture. Use the fill dirt calculator on the Gravel Monkey site to get a closer number for your project.

Ordering Fill Dirt from Gravel Monkey

Ordering is straightforward. Choose your product and quantity online, enter your ZIP code at checkout for the delivery price, and pick a delivery window. The delivery date must be at least 3 business days after the order date. You select morning (7 am to 12 pm) or afternoon (12 pm to 5 pm).

A valid phone number is required to confirm the delivery. You get an email confirmation when the order is placed, then a second email closer to the date with the scheduled window and a photo of the material being loaded. Delivery only goes ahead once you approve that second email. You or someone you nominate must be present during the window.

Gravel Monkey delivers by dump truck direct to your address. Use the code FIRSTTIMER50 at checkout for $50 off your first order. For more on how delivery works, see the delivery information page. Read customer reviews and learn about the company at About Gravel Monkey.

Other Materials That Pair with Fill Dirt

Fill dirt is often the base layer in a project. Here are other materials you might need for the same job.

• Topsoil, goes on top of fill dirt to create a planting layer for grass or gardens.
• Crushed Concrete, used as a base under fill dirt for driveways or pads where drainage is needed.
• Crushed Gravel, a compactable stone that can replace fill dirt in high-traffic areas.
• Driveway Gravel, a surface layer if you are using fill dirt to build up a driveway base.
• Walkway Gravel, decorative stone for paths over a compacted fill dirt subbase.
• Crushed Stone, angular stone that locks together; often used in the first lift under fill dirt.

Frequently Asked Questions About Fill Dirt in Guilford

What is the smallest load of fill dirt you deliver to Guilford?

The smallest load Gravel Monkey delivers is 1 ton. That covers roughly half a cubic yard, enough for a small patch or a few stump holes. For larger projects, loads can go up to 40 tons or more on a single truck.

Does the soil around Guilford change how much fill dirt I need?

Yes, because the soils in the Guilford area are commonly well drained, you may need less base stone below the fill. But the ground freezes about 123 days a year, so deeper fill layers are wise to avoid frost heave. Plan your depth based on the project and use the calculator for tonnage.

How deep should the layer be for planting?

Fill dirt is not for planting. It has no organic matter. For a planting layer, you need topsoil on top of the fill dirt. A typical depth is 6 inches of topsoil over the compacted fill.

What is the difference between the sizes of fill dirt you stock?

Gravel Monkey stocks one type of fill dirt for Guilford. It is a general-purpose fill with a mix of sand, silt, and clay. There are no separate sizes; the material is unscreened and works for raising grade, backfill, and filling holes.

Order Fill Dirt for Your Guilford Project

Raising a low yard or backfilling around a foundation? Fill dirt from Gravel Monkey is delivered by the ton straight to your address. Order online in a few minutes and pick your delivery window.

See the full Guilford page at Gravel Monkey Guilford for more options.

Fill Dirt Delivery to Nearby Towns

Gravel Monkey serves these areas around Guilford.

• New Haven
• West Haven
• Meriden
• Middletown
• East Haddam
• East Berlin
• East Hampton
• Milford
• Old Lyme
• Wolcott